12
INSTALL BAG ON FRAME (FIGURE 15)
1. Thread the bag frames (23) through the sleeve on
the open end of the mesh bag (2).
2. Install the 3/8 x 1/2 x 3" plastic tubes (24) on the
ends of the bag frames and push then ends
together. on the ends of the bag frame and push
the ends together.
NOTE:
The rope handle on the bottom of the bag will
point to the outside when the bag is assembled correctly.
CAUTION:
MAKE SURE the heat resistant
(smooth side) side of the mesh bags are facing
the unit.
Figure 14
Clevis
Pin
3/8" Washer & Bow-Tie
Locking cotter Pin (Not Shown)
Figure 15
Thread bag frame (23) through sleeve
in mesh bag (2).
Install 3/8 x 1/2 x 3" plastic tube (24)
on each end of frame and push the
ends together.
