Gravely Zoom Bagger Скачать руководство пользователя страница 14

14

1. Flip up thumb latch and remove bagger hose from 

bagger cover assembly and bagger boot assembly 
(see figure 18 on page 13).

2. Remove bagger boot assembly.

3. Remove mesh bags (see figure 16 on page 13).

4. Remove bagger frame and cover assembly, bagger 

strap and all mounting hardware. The receiver and 
the front weight tray can remain on the unit for 
further use.

5. Remove the cast iron weight from the front weight 

tray.

BEFORE EACH USE

1. Check bagger parts for wear, deterioration, or 

damage. Replace ONLY with Ariens/Gravely 
original service parts before operating.

2. Make sure the cast iron weight is installed. 

3. Ensure all hardware is tight.

4. Remove any grass buildup from bagger parts.

5. Ensure hose is fastened securely on boot 

assembly.

6. Ensure grass bagger baskets are installed, and the 

bagger cover is closed and securely latched.

OPERATING THE BAGGER

Starting

1. Start engine and engage PTO (see unit’s 

Operator’s Manual).

2. Set throttle to full.

3. Set mower deck height.

4. Choose a slow ground speed.

Shutting Off

1. Allow the mower blades to run for at least 30 

seconds to clear boot assembly and hose of debris.

2. Disengage PTO.

3. Shut off unit (see unit’s Operator’s Manual).

AIRFLOW INDICATOR (FIGURE 19)

When the airflow indicator is pointed straight up, the air is 
restricted which indicates one or more possible 
problems:

The grass bagger baskets are full and need to be 
emptied. See 

Emptying Mesh Bags 

on page 14.

There is a clog in the bagger. See 

Unclogging 

Bagger 

on page 15. 

When the airflow indicator is facing forward, the air is 
unrestricted indicating that the grass bagger baskets are 
not full and there are no clogs in the bagger.

EMPTYING MESH BAGS

If bagger stops picking up grass clippings, the mesh bags 
may be full.

REMOVAL

WARNING: 

AVOID INJURY. Read and 

understand the entire 

Safety

 section before 

proceeding.

OPERATION

WARNING: 

AVOID INJURY. Read and 

understand the entire 

Safety

 section before 

proceeding.

CAUTION: 

Do not tow anything with the hitch 

when the bagger is installed.

WARNING: 

Lower attachment, stop engine, and 

remove key to prevent unauthorized use. DO 
NOT park on slopes.

 Figure 19

Airflow

Restricted

Airflow

Unrestricted

Airflow

Indicator

Содержание Zoom Bagger

























Отзывы: