Gravely Ariens 815134 Скачать руководство пользователя страница 5

5

NEVER operate bagger if the unit’s safety interlock 
system is not working properly.

Ensure that tires are inflated to recommended pressure.

Always install counterweight before operating unit with 
bagger attached. Always remove counterweight when 
bagger is removed from the unit

Under normal usage the bag material is subject to 
deterioration and wear. Check frequently for wear and 
damage and replace if necessary. 

Keep all nuts and bolts tight to be sure the equipment is 
in safe working condition.

Maintain the machine to be in compliance with the 
maintenance schedule.

Clean grass and debris from unit, especially from around 
muffler and engine, to help prevent fires.

Check parking brake operation frequently. Adjust and 
service as required.

Inspect unit before each use for missing or damaged 
decals and shields, correctly operating safety interlock 
system, and deterioration of grass catchers. Replace or 
repair as needed.

Ensure Safety Interlock System is functioning properly. 
DO NOT operate unit if safety interlock is damaged or 
disabled.

Start and operate unit only when seated in operator’s 
position. Steering control levers must be in neutral, PTO 
disengaged and parking brake set when starting engine.

NEVER interfere with the intended function of a safety 
device or reduce the protection provided by a safety 
device. Check their proper operation regularly.

Keep machine free of grass, leaves or other debris 
build-up. Clean up oil or fuel spillage and remove any 
fuel-soaked debris.

Operation

Always be aware of maximum sweep of bagger when 
turning. Always allow adequate clearance between 
bagger, personnel and other objects when turning.

Do not operate machine without the entire grass 
catcher, discharge guard, rear guard, or other safety 
protective devices in place and working.

As grass catcher fills, be alert to changing unit stability 
and control.

Be sure the area is clear of bystanders before 
operating. Stop machine if anyone enters the area.

ALWAYS maintain unit in safe operating condition. 
Damaged or worn out muffler can cause fire or 
explosion.

This product is equipped with an internal combustion 
type engine. DO NOT use unit on or near any 
unimproved, forest-covered or brush-covered land 
unless exhaust system is equipped with a spark arrester 
meeting applicable local, state or federal laws. A spark 
arrester, if it is used, must be maintained in effective 
working order by operator.

DO NOT operate machine while feeling tired, ill or under 
the influence of alcohol or drugs.

DO NOT put hands or feet near rotating parts or under 
the machine. Keep clear of the discharge opening at all 
times.

DO NOT touch parts which are hot. Allow parts to cool.

DO NOT operate machine without the entire grass 
catcher, discharge guard or other safety devices in 
place and working.

ALWAYS keep hands and feet away from all pinch 
points.

Avoid slippery surfaces. ALWAYS be sure of your 
footing.

NEVER carry passengers.

NEVER direct discharged material toward anyone. 
Avoid discharging material against a wall or obstruction. 
Material may ricochet back toward the operator. Stop 
the blade(s) when crossing gravel surfaces.

NEVER engage PTO when attachment, including 
mower blades, is not in use. ALWAYS turn off power to 
attachment when not in active use such as traveling or 
crossing driveways.

ALWAYS disengage PTO, stop unit and engine, 
remove key, engage parking brake and allow moving 
parts to stop before leaving operator’s position.

NEVER engage PTO while raising the attachment, 
including mower blades, or when attachment is in the 
raised position.

Keep safety devices or guards in place and functioning 
properly. NEVER modify or remove safety devices.

DO NOT mow in reverse unless absolutely necessary. 
ALWAYS look down and behind before and while 
backing.

Stop the engine (motor) and wait until the blade comes 
to a complete stop before cleaning the machine, 
removing grass catcher, or unclogging the discharge 
guard.

Slow down before turning.

If you strike a foreign object, stop and inspect the 
machine. Repair, if necessary, before restarting.

NEVER leave a running machine unattended. ALWAYS 
turn off blade(s), set parking brake, stop engine and 
remove key before dismounting.

Disengage blade(s) when not mowing. Shut off engine 
and wait for all parts to come to a complete stop before 
cleaning the machine, removing the grass catcher, or 
unclogging the discharge guard.

Know the weight of loads. Limit loads to those you can 
safely control and the unit can safely handle.

Содержание Ariens 815134



























Отзывы: