GRAUPNER mz-18 HoTT Скачать руководство пользователя страница 6

6 / 28

S1005_S1006_jp_V1

Intended use

This remote-control system may only be used for the purpose 

specified by the manufacturer for operation of remote control 

models without passengers. Any other type of use is impermis-

sible and may damage the system and cause significant prop-

erty damage and/or personal injury. No warranty or liability is 

therefore offered for any improper use not covered by these pro-

visions.
Read through this entire manual before you attempt to install or 

use the transmitter.

Graupner/SJ

 constantly works on the development of all prod-

ucts; we reserve the right to change the item, its technology and 

equipment.

Target group

The product is not a toy. It is not suitable for children under 14 

years. The operation of the 

mz-18 / mz-24 HoTT transmiter

 must 

be performed by experienced modelers. If you do not have suf-

ficient knowledge about dealing with radio-controlled models, 

please contact an experienced modeler or a model club.

Package content

 



Transmitter 

mz-18

 / 

mz-24 HoTT

 



Transmitter battery

 



Battery charger

 



Receiver (optional)

 



USB Adapter/Interface

 



USB cable

 



Adapter cable

 



Transmitter strap

 



Pencil for display use

 



Transmitter manual (Part 1)

 



Receiver manual (optional)

Accessory for transmitter 

mz-24 HoTT

:

 



Micro SD card

 



Micro SD card adapter

 



Transport case

The programming manual (manual part 2) can be found in its last 
version on 

www.graupner.de

 by the related item page.

Содержание mz-18 HoTT





























Отзывы: