GRAUPNER mz-18 HoTT, Руководство пользователя

Страница: 17 / 28

17 / 28
S1005_S1006_jp_V1
Commissioning
Settings by the first use
Switch on transmitter
When you switch on the transmitter the position of the servos
connected to the outputs 1 (plane) and 6 (heli) are checked. If
the servo position is out of the idle range, the RF module will
remain Off.
If this is not the case, the RF module will be activated and the
image on the left will appear.
At the same time a warning alarm will be emitted.
You now have the option of waiting a few seconds until the dis-
play disappears or maintaining the RF transmissions by manu-
ally tapping the ON button, or switching them off by tapping
the OFF button.
In the base display you can check if the RF module is on or off.
The related symbol is on the upper left side of the display.
The red "RX" and green "TX" on the left and right of this switch
symbol mean that the currently active model memory has once
been linked to a
Graupner
-HoTT receiver but is presently not
linked.
If there is a connection, it will be indicated by a green colored
numeric indication of the actual voltage of the receiver power
supply in the field near "RX" and "TX".
If the transmitter is turned on while the RF transmission is off, all
of this information is not displayed, and the high-frequency
switch symbol is gray.
If it appears the display represented on the left after switching
the transmitter on, the currently active model memory is not
linked to any receiver. By pushing the SET button you arrive to
the "Transmitter settings" menu, in which you can bind the trans-
mitter.
WARNING
Thr.HOLD
Thr.PO
Thr.CUT
QLink
Please select RF ON/OFF
ON
RC Signal
OFF
000 000
000 000
mz
000% 000%
000 000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V RX TX
RX 00.0V
WARNING
Thr.HOLD
Thr.POS
Thr.CUT
QLink
NO RECEIVER BOUND
SET