GRAUPNER mz-10c, Руководство пользователя

Страница: 26 / 33

26 / 33
OFF Mode
In the event of a malfunction the OFF Mode allows the receiver to stop
transmitting servo output control pulses. The receiver switches the pulse
line OFF.
To save the selection, press and hold the
MODE button for 3-4 seconds.
Release the button. The status LED and the acoustic signal should indicate
the transmitter power-on status.
The transmitter is now in
STICK MODE . If not, repeat the process until the
mode is changed.
STANDARD Mode
In case of interference, only the throttle/pitch (CH1) moves to the position
preset; all other channels remain in HOLD position. Switch to the Attitude
mode and move the throttle stick and its trim to the desired position. Press
and hold the MODE button for 3-4 seconds to save the selection. Release
the button. The status LED and the acoustic signal should indicate the
transmitter power-on status.
The transmitter is now in
STICK MODE
. If not, repeat the process until the
mode is changed.
Note
To individually program the different FAIL SAFE options, connect a Smart-
Box (sold separately). Setting CH5 to 1500 µs and CH1 to 1100 µs will
activate Attitude Mode during a Fail Safe situation and stop motor function.