GRAUPNER mx-16 ifs, Руководство по программированию

Страница: 42 / 132

42 Program description: reserving a new memory
If you have already read through the manual to this
point, you will undoubtedly have made your fi rst attempt
at programming the system already. Even so, it is impor-
tant to describe each menu here in detail, to ensure that
you have comprehensive instructions for each applica-
tion you are likely to encounter.
In this section we start with setting up a “free” model
memory prior to “programming” a new model:
GRAUBELE
#01
0:00h
stop
f l t
«normal »
K78 IFS
0:00
0:00
12.0V
Note:
You can adjust the screen contrast at any time by turn-
ing the rotary cylinder when held in.
From the basic display press the ENTER button to move
to the “Multi-function list”. You can return to the basic
screen at any time by pressing
ESC . If necessary, select
the » mod. mem. « (Model memory) menu from the list
using the rotary cylinder …
mod.mem.
ser vo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
… then press ENTER or the rotary cylinder.
Detailed description of programming
Reserving a new memory
select model
clear model
copy mod–>mod
=>
=>
=>
Now press ENTER or the rotary cylinder again to move
on to the “ select model ” sub-menu.
03
04
05
¿¿ empty ¿ 02
01
¿¿
empty
¿
¿¿ empty ¿
¿¿
empty
¿
In the transmitter’s default state the fi rst model memory
is already initialised with the “
Fixed-wing model ”
model type, while the remainder are not yet occupied;
these are entitled “
ÃÃ
empty
Ã
”. If you want to set up
a fi xed-wing model, then you can immediately start the
programming procedure after leaving the “
select model ”
sub-menu and the » mod. mem.« menu by pressing
ESC each time … alternatively you can select one of the
free model memories, and press ENTER or the rotary
cylinder.
01
03
04
05
02
¿¿ empty ¿
¿¿
empty
¿
¿¿ empty ¿
¿¿
empty
¿
You are now invited to select the basic model type, i. e.
either “Fixed-wing” or “Helicopter”:
S e l m o d e l t y p e
( e m p t y m o d m e m )
Use the rotary cylinder to select the appropriate model
type, then press
ENTER or the rotary cylinder to confi rm
your choice. The screen switches back to the basic
display: the model memory is now reserved for your
chosen model type.
However, if you wish to get started with a
helicop-
ter , then select one of the model memories entitled
“ ÃÃ
empty
Ã
”, and confi rm your choice with a brief
press on the rotary cylinder or the ENTER button. You
are now requested to defi ne the basic model type, i. e.
either “fi xed-wing” or “helicopter”. Use the rotary cylin-
der to select the corresponding symbol, then press the
rotary cylinder or the
ENTER button again briefl y. This
initialises the selected model type for the model memory
you just selected, and you can now start programming
your model in this memory.
It is now only possible to change this memory to a dif-
ferent model type if you fi rst erase the model memory
(»
mod. mem. « menu, page 44).
Note:
If you wish to erase the model memory which is cur- •
rently active in the basic display, you will have to de-
fi ne one of the two model types “fi xed-wing” or “heli-
copter” immediately after completing the erase
procedure. You cannot avoid making this choice by
switching the transmitter off. If you wish to remove a
model memory which you inadvertently occupied, you
can simply erase it from a different model memory.