GRAUPNER m-12 HOTT, Руководство по эксплуатации

Страница: 53 / 77

12. Fail safe (AIRCRAFR and Helicopter)
- Hold
If you lose connection between the transmitter and the receiver, all channels hold the last
given command.
- F/S
If the signal is lost, all channels are driven to their failsafe preset position during binding.
Press the direction button to highlight the fail safe then press the ENT button to access
the function. The black dot is on the NO.1 channel indicating NO.1 channel is selected
and the Hold (the default mode) is assigned. Press the direction button to select the
channel and press the ENT button to select the F/S or the hold. After completing to select
the desired mode in all channels, press the direction button to select the Delay. Press the
ENT button to highlight the value then press the direction button to adjust the desired val-
ue. Press the ESC button to highlight the STO. Move the stick to the desired position then
press the ENT button. The popup message “position stored” appears (the F/S function
is operated at that stick position). Confirm the failsafe setting is correct by turning off the
transmitter.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
When you bind your transmitter, you are programming the receiver with failsafe defaults.
If connection is lost between the transmitter and receiver, the receiver immediately oper-
ates in those preprogrammed default positions. Graupner receiver has 2 failsafe modes,
hold and Pos (Position/Fail Safe)
53