GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. We reserve the right to introduce modifications.
#00596367 12
/2009
8
Wiring diagram
Speed controller
central motor
To receiver
Motor
Motor
G2 connectors
G2 connectors
Motor
G2 connectors
G2 connectors
Speed controller
Motor outer
motors
Servo Y-lead, 3936.11
3061
Drive battery
Drive battery
B
B
Drive battery
A
A
Maiden run
Charge up all the batteries and test the model’s working systems one by one. Check that all the parts
which are not permanently attached are firmly seated. Now you are ready for the boat’s maiden run.
Keep the speed low at first, and give yourself plenty of time to become familiar with the vessel’s
handling. The model has quite a turn of speed, its minimum turning radius is large and its braking
distance long. For this reason it should only be operated on a fairly large stretch of water. Avoid letting
the Bismarck run too far from the bank.
We hope you have many hours of pleasure running your model of the BISMARCK.
Replacement parts
Order No. 2089.6
Replacement propeller set (3 off)
You will also need the following items (not included in the set)
Order No.
Description
4729
X-408 ECO-SPORT SYSTEM FM RC set, 40 MHz
or
4714
X-412 FM RC set, 40 MHz
We also recommend any Graupner IFS computer system, e.g. mx-16 iFS (Order No. 23000)
2875
NAVY V40R speed controller (two required)
768
Lead-acid drive battery, 6 V / 10 Ah (two required)
3935.32
Servo extension lead, 320 mm
3936.11
Y-lead (for parallel connection of speed controllers)
3061
G2 parallel lead
3389 Copper
cable
2989.5
G2 connector system for the speed controller and drive batteries (two required)
3368
Velcro (hook-and-loop) tape
