background image

GRAUPNER GmbH & Co. KG      D-73230 KIRCHHEIM/TECK      GERMANY    

No liability for printing errors. We reserve the right to introduce modifications. 

          #00596367                                 12

/2009

 

2

are allowed by statute. This does not affect claims based on legal regulations, especially according to 
product liability law. 
 

Guarantee requirements 

The purchaser is required to make the guarantee claim in writing, and must enclose original proof of 
purchase (e.g. invoice, receipt, delivery note) and this guarantee card. He must send the defective 
goods to us at his own cost, using the following address: 
 

Gliders 

Brunel Drive, Newark, Nottinghamshire, NG242EG 

 
The purchaser should state the material defect or manufacturing fault, or the symptoms of the fault, in 
as accurate a manner as possible, so that we can check if our guarantee obligation is applicable. 
The goods are transported from the consumer to us and from us to the consumer at the risk of the 
consumer. 
 

Duration of validity 

This declaration only applies to claims made to us during the claim period as stated in this declaration. 
The claim period is 24 months from the date of purchase of the product by the consumer from a dealer 
in the Federal Republic of Germany (date of purchase). If a defect arises after the end of the claim 
period, or if the evidence or documents required according to this declaration in order to make the 
claim valid are not presented until after this period, then the consumer forfeits any rights or claims from 
this declaration. 
 

Limitation by lapse of time 

If we do not acknowledge the validity of a claim based on this declaration within the claim period, all 
claims based on this declaration are barred by the statute of limitations after six months from the time 
of implementation; however, this cannot occur before the end of the claim period. 
 

Applicable law 

This declaration, and the claims, rights and obligations arising from it, are based exclusively on the 
pertinent German Law, without the norms of international private law, and excluding UN retail law. 
 

Important safety notes 

You have acquired a kit which can be assembled into a fully working RC model when fitted out with 
suitable accessories. However, we as manufacturers have no control over the way you build and 
operate your RC model boat, nor how you install, operate and maintain the associated components, 
and for this reason we are obliged to deny all liability for loss, damage or costs which are incurred due 
to the incompetent or incorrect use and operation of our products, or which are connected with such 
operation in any way. Unless otherwise prescribed by binding law, the obligation of the GRAUPNER 
company to pay compensation, regardless of the legal argument employed, is excluded. This includes 
personal injury, death, damage to buildings, damage due to loss of business or turnover, interruption 
of business or other direct or indirect consequent damage whose root cause was the operation of the 
model. 
The total liability in all cases is limited to the amount of money which you actually paid for this model. 
 

This model boat is built and operated at the sole and express responsibility of the operator. 
The only way to avoid injury to persons and damage to property is to handle and operate the 
model with the greatest care and consideration at all times. 

 
Before you run the model for the first time please check that your private third-party insurance covers 
the operation of model boats of this kind. If in doubt, take out a special insurance policy designed to 
cover modelling risks. 
These safety notes should be kept in a safe place. If you ever dispose of the model, be sure to pass 
them on to the new owner. 
 

The following points are important and must be observed at all times:

 

 

This model is not suitable for young persons under fourteen years of age. 

  The projecting parts of the model may be sharp, and the aerials and masts could cause eye 

injuries. 

 

Bear in mind that tools can be dangerous; always be careful when handling them. 

Содержание BISMARCK









Отзывы: