GRAUPNER Alpha 150Q Скачать руководство пользователя страница 45

Страница: 45 / 48

45 / 48

16571.GPS_Alpha150Q_V2.0sh.en

Firmware update step-by-step

1. Download the required firmware file from the product page to

your PC and unzip it if necessary.

2. Be sure to check the charge level of the battery to be used as the

power source before each firmware update.

3. When switched off, connect the device to be powered up to a PC

or laptop using the aforementioned cables and adapters.

ശ

Do not interrupt this connection during an update! Therefore,

it is essential to ensure trouble-free contact between trans-

mitter and computer, and later, after plugging in the power

source, between copter and power source.

4. Start the program "Firmware_Upgrade_gr_Studio".
5. Select the correct COM port in the program part "Port select" of

the "Firmware_Upgrade_gr_Studio".

6. Open the program part "Slowflyer, Gyro Receiver Downloader" of

the "Firmware_Upgrade_gr_Studio".

7. Click on "File" in the upper left corner and change to the location

of the previously downloaded upgrade file in the following "Open

File" dialog.

8. Select the ".bin" file matching your copter.
9. Click on "Start".
10. Now connect the battery, previously checked for its charge status,

to the copter.
The firmware upgrade process starts.

11. The end of the data transfer will be indicated by the update pro-

gram.

12. Disconnect the battery from the copter and then disconnect the

PC or laptop.

13. Be sure to check the copter for correctness after each update.

Содержание Alpha 150Q

















































Результаты поиска

Содержание Alpha 150Q

Отзывы:

Бренды по названию

Популярные бренды

GRAUPNER Alpha 150Q, Руководство пользователя

Результаты поиска

Содержание Alpha 150Q

Отзывы:

Бренды по названию

Популярные бренды