GRAUPNER 6478 Скачать руководство пользователя

Страница: 51 / 55

Page

51/55

ex1)

INTERNAL POWER LIMITE = 360W

Using DC POWER 15V / 20A (300W)

If power rate is set to 50%, CH1=150W, CH2=150W can

be used in accordance with internal wattage limitation.

ex2)

INTERNAL POWER LIMITE = 360W

AC INTERNAL POWER (120W)

If power rate is set to 50%, CH1=60W, CH2=60W can be

used in accordance with AC power wattage limitation.

One output takes max 250Wattage.

ex1)

INTERNAL POWER LIMITE = 360W

ONE OUTPUT MAX WATTAGE = 250W

DC POWER 15V / 30A (450W)

If power rate is set to 90% in output 1, 450W X 90%=

405W can be used, but it could have max 250W due to

the wattage limitation.

b. OPERATING GRAPHIC

- It should be activated like data view menu above pos.7.

c. BALANCER GRAPHIC

- It should be activated like balance menu above pos.6.

13-2. CYCLE OPERATION SCREEN

- It shows an order of cycle operation.

13-3. STEP-CHARGE OPERATION SCREEN

- It shows an order of STEP-CHARGE

- If “DISCHARGE OFF” is set, wait for reserve time then starts charging.

- If “DISCHARGE ON” is set, discharges first then wait for reserve time.

- If “DISCHARGE ON” is set, wait for one minute then starts charging.

- Shows step number being used and status of IMPULSE and REFLEX

13-4. REPEAK CHARGE OPERATION SCREEN

- It shows an order of REPEAK CHARGE

13-5. TYRE HEATER OPERATION SCREEN

- This should be activated like the setup screen, and “==OPERATING==” should be

shown at the top line of the screen.

- All parameters can be changed during operating.

13-6. MOTOR OPERATION SCREEN

- This should be activated like the setup screen, and “==OPERATING==” should be

shown at the top line of the screen.

- All parameters can be changed during operating.

Содержание 6478
























































Результаты поиска

Содержание 6478

Отзывы:

Похожие инструкции для 6478

Бренды по названию

Популярные бренды

GRAUPNER 6478, Руководство по эксплуатации

Результаты поиска

Содержание 6478

Отзывы:

Похожие инструкции для 6478

Бренды по названию

Популярные бренды