31
Read contents of block 01 to 99:
Press the Prog. key 1x
for
approximately 1 second
.
Your are in block 01.
Read the contents of this block:
Press the Prog. key only
briefly
step-wise. The contents are
displayed in turn.
If a date range is displayed,
„date “ appears in the display.
With the symbol key, read the
end date and switch back to the
start date.
If a cycle switching command is
displayed, appears in the
display. Press the key 1x and
read the ON or OFF switching
duration.
Again press the Prog. key for
approximately 1 second
. You are
in the next block. Read the block
contents, see above.
It is possible to exit or finish reading
at any time with the key.
The display shows the
date and the time.
GB
