Zodiak User Manual
405
Still Store Operations
2.
Jog back one field, and set it as the
Loop From
point.
3.
Set a negative loop count so the clip loops constantly and start
playback. Watch the animation carefully at the loop point. If a jump is
visible, adjust the Loop To and/or Loop From points using the soft
knobs while the animation is running until the jump disappears.
4.
Stop the clip playback, set the Count to the desired number of repeats,
and touch
Save
to save the clip with the modifications.
Loading Items to Still Store Outputs with the Still Store Menu
Items can be loaded directly to an output, or preset so it can be taken to the
output later. If you are using video/key pair items, the Still Store output
you select should be paired.
Direct Load
1.
Touch the Program output button of the desired Still Store output.
2.
Touch the desired item in the scrolling list on the right (you may need
to touch the
Show Details
button to reveal the list). If cached, the item will
be displayed on the output immediately. If not cached, there will be a
delay before it is displayed, the length of which depends on the amount
of data being cached.
Preset Load
1.
Touch the Preset output button of the desired Still Store output.
2.
Touch the desired item in the scrolling list on the right (you may need
to touch the
Show Details
button to reveal the list). The item preset will
be cached if necessary.
3.
When you wish to display the item on that Still Store output, press the
Arrow button between the Preset and Program buttons.
Содержание zodiak
