GRASS VALLEY Turbo, Руководство пользователя

Страница: 190 / 300

190
Turbo iDDR User Guide 06 July 2005
Chapter 4 Operation: AppCenter Workstation
4. Select the
Change event pauses
check box, then choose the
Remove all pauses
option.
5. Click
OK
.
Pauses are removed from all events in the section. The section now plays without
pausing between any events.
Adding GPI output triggers to playlists
You can assign GPI output triggers to events and sections in a playlist. The GPI
outputs can be used to trigger external equipment when the list plays. Before you can
use GPI output triggers in a list, you must assign GPI outputs to the play channel using
Configuration Manager. Refer to
Chapter 2, Configuration: Turbo iDDR on page 33 .
NOTE: If you want to play a list that was created on another play channel, you must
ensure that GPI triggers assigned to the play channels use the same names, otherwise
the GPI triggers will not occur. Using identical GPI naming also allows copying and
pasting sections and events between lists.
To trigger GPI outputs:
1. Use Configuration Manager to assign GPI outputs to the current Play channel.
Follow instructions in Chapter 2, Configuration: Turbo iDDR, then return to this
procedure.
2. Select an event or section in the playlist, then open the properties dialog box by
doing one of the following:
• Select
Playlist | Properties
.
• Click the
Properties
button.
• Right-click on an event or section and select
Properties
.