GRASS VALLEY Turbo, Руководство пользователя

Страница: 172 / 300

172
Turbo iDDR User Guide 06 July 2005
Chapter 4 Operation: AppCenter Workstation
&
View tabs These tabs toggle between List View and Events view.
'
Insert and Accept
Buttons Insert Button – Displayed when editing a new event that is not yet
in the list. Inserts the current event into the list after the currently
selected event.
Accept Button – Displayed when editing an event in a list.
Propagates changes you made to the event properties to the event in
the list, for example, event marks, thumbnail, or end properties.
(
Goto Button Opens the Goto dialog box which allows you to jump to a specific
timecode in the event.
)
Time Dome Displays a graphical representation of the current position between
the event's marks with an empty Time Dome representing the current
position at event in, and a full dome representing the current position
at event out. The time remaining from the current position is
displayed beneath the Time Dome. When playing media that is
currently being recorded, you’ll see that the event mark-out is set to
the timecode of the last frame of video when event was initially
created even though the source clip is still recording.
*
Thumbnail By default, an event uses the same thumbnail as the source clip. You
can select the thumbnail image to change the event thumbnail image
to the current frame, or to view the event properties.
+
Event In/Event Out Used to change the in and out points of the event. These changes do
not take effect until the event is inserted into the list using the Insert
button, in the case of a new event, or the changes are accepted, using
the Accept button in the case of an existing clip. Clicking Accept
propagates event change to the event in the list. Changes to the event
are lost if you eject without selecting insert or accept as required.
Event In/Out changes do not affect the source clip's mark in and out
values, but only the event's marks used by the Playlist.
Playlist Events View
Menu New Event– Opens the New Event dialog box which allows you to
navigate through the clips pane to select the source material for the
new event.
Insert Event– Inserts the loaded event in the list. The event is
inserted after the last selected event. This menu item only appears
when the event is not in the play list, for instance after selecting New
Event.
Locate– Locates the event’s source clip in the clips pane.
See
“Locating the event source clip” on page 183 .
Properties– Opens the Event Properties dialog box which includes
pages for setting up list timecode, adding metadata, and setting
attributes that will occur during playback.
Options– Opens the Options dialog box.
Control Description and User Operation
List
Ev
ent