T2
―
User Manual ― Workstation mode ―
22
Section 2 ―
Setup
Hardware settings
Clicking the
Config
button at the top right corner of the screen displayed in
the Workstation mode, the System settings screen will open.
Modify the settings according to your environment.
Config
button
System settings
Hardware settings
Reference
The options you can choose from for the reference input method are
External
,
Input
and
Internal
.
The sync status is displayed in the boxes below this button.
P1
Displays if the P1 channel is synchronized.
P2
Displays if the P2 channel is synchronized.
3Sync phase
To use the HD tri-level REF signal as the HD REF signal, check this box. Enter a
value to adjust the REF phase. (Available only for
External
)
HD BB phase
To use the SD Black Burst REF signal as the HD REF signal, check this box.
Enter a value to adjust the REF phase. (Available only for
External
)
SD BB phase
To use the SD Black Burst REF signal as the SD REF signal, check this box.
Enter a value to adjust the REF phase. (Available only for
External
)
Audio Reference Level
Adjusts the audio reference level (Headroom).
Input/Output level
Adjusts the audio input/output level.
