GRASS VALLEY M-Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 80

background image

2

M-Series Service Manual

6 July 2004

Copyright

Copyright © 2004 Thomson Broadcast and Media Solutions, Inc. All rights reserved. Printed in
the United States of America.

This document may not be copied in whole or in part, or otherwise reproduced except as
specifically permitted under U.S. copyright law, without the prior written consent of Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900

Trademarks

Grass Valley, M-Series, Profile, and Profile XP are either registered trademarks or trademarks
of Thomson Broadcast and Media Solutions, Inc. in the United States and/or other countries.
Other trademarks used in this document are either registered trademarks or trademarks of the
manufacturers or vendors of the associated products. Thomson Broadcast and Media
Solutions, Inc. products are covered by U.S. and foreign patents, issued and pending.
Additional information regarding Thomson Broadcast and Media Solutions, Inc. trademarks
and other proprietary rights may be found at www.thomsongrassvalley.com.

Disclaimer

Product options and specifications subject to change without notice. The information in this
manual is furnished for informational use only, is subject to change without notice, and should
not be construed as a commitment by Thomson Broadcast and Media Solutions, Inc. Thomson
Broadcast and Media Solutions, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this publication.

U.S. Government
Restricted Rights
Legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900
U.S.A.

Revision Status

Rev Date

Description

September 8,
2003

Initial release of the M-Series Service Manual 071-8229-00

July 6, 2004

Updated to include service information for units with digital audio—
071-8229-01

«
1
2
3
4
...
»

Содержание M-Series

















































































Отзывы:

Нет отзывов

Похожие инструкции для M-Series

Бренд: Qvis Страницы: 112

Бренд: Navitel Страницы: 19

Бренд: Observint Страницы: 125

Бренд: Intellix Страницы: 35

Бренд: Q-See Страницы: 98

Бренд: DAEWOO ELECTRONICS Страницы: 90

Бренд: Cobra Страницы: 2

Бренд: Digital Watchdog Страницы: 2

Бренд: Kamera2000 Страницы: 9

Бренд: Velleman Страницы: 41

Бренд: Chipatronic Страницы: 16

Real-time NETWORK VIDEO RECORDER

Бренд: Digital ID View Страницы: 115

Eagle View DVR Kit

Бренд: ClearView Страницы: 4

Бренд: SVSi Страницы: 7

Бренд: Alien Hero Страницы: 156

Бренд: Idis Страницы: 54

Бренд: ICRealtime Страницы: 195

Бренд: Swann Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды