GRASS VALLEY LDK 8300 -, Руководство пользователя

Страница: 64 / 110

64 LDK 8300 High-speed HD camera User’s Guide (v4.0)
Chapter 5 - Video setup
5.7.2 Setup using the Operational Control Panel
Follow these steps to set up the color corrector on the OCP 400:
1. With the control panel connected to the camera, press the Color button on the panel (in
the video parameter section). The Color menu is shown.
2. Use the Next button to scroll to the Color Corrector menu. Push the selection button to
turn on the Corrector .
3. The Color Corrector submenu appears. There are two pages that can be accessed by
using the
Next and Prev buttons.
The first page contains the setup items. Use the navigation buttons to scroll through the
different setup items.
1. Select the Color Correction set at the top left of the screen.
2. Activate the selected set using the top left selection button. When the set is not activated,
all items are blocked.
3. Select a color area by changing the Color and Width parameters. A preview of the color
selection is shown on the bottom left of the screen.
4. Adjust the Hue , Saturation an Luminance of the selected color range.
Figure 5-3. Color corrector setup on the OCP 400 (page 1).
Use the Next button to go to the second page.
1. Turn the CC View item on of off the view the color area selection.
2. Select a transition style using the Smoothing item.
3. You can reset all six Color Correction sets with the Reset CC item.
4. Leave this page by pressing the Prev button.
Figure 5-4. Color corrector setup on the OCP 400 (page 2).
Exit Toggle
Prev Next
CC SET:1
YL-
Color:280
Width:225
ON
HUE:76
SAT:50
LUM:55
Color wheel
preview
Activate
selected set
Exit Toggle
Prev
Next
CC View
Off
Sharp
Smoothing Reset CC