manualshive.com logo in svg

GRASS VALLEY LDK 8300 -, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY LDK 8300 - Скачать руководство пользователя страница 20

20

LDK 8300 High-speed HD camera User’s Guide (v4.0)

Chapter 2  - Installation

Caution 

Do not attach a lens weighing more than 5 kg (11 lbs) to the camera without a proper lens 
support.

When a new lens is fitted to the camera it may be necessary to carry out some adjustments to 
optimize its use, for example, back focus or shading. For more information about these 
adjustments refer to the lens manufacturer’s documentation.

☞

Note

 

☞

Note

 

Always mount the dust protection cap when the lens is not connected to the camera.

2.2  LDK 5302/60 2-inch viewfinder

2.2.1  Mounting viewfinder and microphone holder

To mount the viewfinder proceed as follows:

1.

Loosen locking ring (1) of viewfinder support bracket (2) at the front of the camera handle. 
(As seen from the rear of the camera, turning the locking ring counterclockwise moves it 
towards the handle.)

2.

Slide the viewfinder onto the viewfinder support bracket.

3.

Tighten the locking ring (1) by turning it clockwise (as seen from rear) so that the 
viewfinder is mounted securely to the support.

4.

Connect the viewfinder cable to the viewfinder connector socket (6) at the top right of the 
camera.

5.

Slide the microphone holder (4) onto the viewfinder and secure with the knurled screw 
(5).

☞

Note

 

☞

Note

 

Always fit the microphone holder as it functions as a safety stop for the viewfinder.

6.

To improve the comfort of the skin contact when using the viewfinder, fit the eye piece 
cover (3) to the rubber eyepiece. Spare eye piece covers (ordering number 
3922 405 00461) are available via your Grass Valley representative.

Содержание LDK 8300 -















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды