manualshive.com logo in svg

GRASS VALLEY LDK 8300 -, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY LDK 8300 - Скачать руководство пользователя страница 11

LDK 8300 High-speed HD camera User’s Guide (v4.0)

11

Fiber-optic transmission units

Laser safety statement (Europe)

Fiber-optic transmission units are classified as a "CLASS 1 Laser Product" according to EN 
60825-1, Safety of Laser products. Class 1 laser products are considered safe and do not result 
in biological hazard if used according to the instructions.

Laser safety statement (US)

Fiber-optic transmission units are classified as a "CLASS 1 Laser Product" according to 21CFR 
1040.10 of the US Food and Drug Administration (FDA) Center for Devices and Radiological 
Health.

WARNING 

Use of controls, adjustments or performance of procedures other than those specified herein 
may result in hazardous radiation exposure. 

To ensure proper use of this product, please read this instruction manual carefully and retain 
for future reference. Should the unit ever require maintenance, contact an authorized service 
location.

Fiber-optic cable precautions

Fiber-optic cables and connectors are easily damaged; take the following precautions into 
account:

–

Do not bend the cable beyond the minimum permissible bend range specified for the 
cable.

–

Avoid kinks in the cable. 

–

Avoid subjecting the cable to a high tension force (even momentarily).

–

Do not twist the cable when connecting it to equipment.

–

Insert connectors straight and fully into their corresponding sockets.

–

In fiber-optic cable systems always put the dust caps on cable and panel connectors 
immediately after disconnecting a cable. Keep the dust caps clean.

CLASS 1
LASER PRODUCT

LASER KLASSE 1
PRODUKT

Содержание LDK 8300 -















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды