v2.0
LDK 8000 User’s Guide | Installation
2-10
2.9
Attaching an adapter
The camera head is a multi-role camera head that can be used with various adapters.
Caution
Be extremely careful with the connectors between the camera head and the adapter. Do not
allow the guide pins to damage the pins of the connector. Follow these steps in the order
given. Tightening or loosening the screws in the wrong order could result in mechanical
damage to the camera.
To attach an adapter to the camera proceed as follow:
1.
Fit the guide pin at the top rear of the camera head and the guide pins on either side of
the camera connector into the corresponding slots (1 and 2) of the adapter.
2.
First, tighten the two horizontal screws (3) on the top of camera.
3.
Next, tighten the two horizontal screws (4) at the front of the camera.
4.
Lastly, tighten the vertical screw (5) in the handle of the camera.
To detach an adapter from the camera head follow the steps for attaching it in the reverse
order.
Figure 2-10.
Attaching an adapter
5
1
4
3
2
Содержание LDK 8000
