GRASS VALLEY KALEIDO-MX страница 36 Скачать руководство пользователя | Manualshive

Страница: 36 / 55

background image

22

Operation

Card Button and LED Interface

Card Button and LED Interface

Kaleido-MX Input Card Interface

Summary view of the interface on the left, and right sides of a Kaleido-MX input card

Input card Status LED

The Status LED is located on the front edge of a Kaleido-MX card, immediately above the
Select button, and is visible through the front access door of the Densité frame. This multi-
color LED indicates the status of the card, by color, and by blinking/steady illumination:

The Status LED always shows the most severe detected error status. In the table above,
error severity increases from top to bottom, with green representing no error/disabled, and
blinking red the most severe error conditions.

If the Status LED is blinking orange, it means that the card is selected for local control using
the Densité frame’s control panel (or that the card is booting up). See

Using the Densité

Frame Control Panel

, on page 26 for details.

If the Status LED is steady red (not blinking), use the Densité frame control panel to review
card status information (see

Local Control Panel Menu Structure

, on page 27). If the card

LED

Meaning

Green

Normal (communication established with an output card)

Blinking orange

Booting (or the card is selected for local control)

Red

Default color before firmware initialization is complete /
update in progress (may last more than 10 minutes)

Blinking red

Fan failure / no rear

SDI LEDs 9–16

SDI LEDs 1–8

Status LED

Select button

Power LED

ABT LED

REF LED

Input card, left side

Input card, right side

Boot status 1

Boot status 2
(not used)

«
...
34
35
36
37
38
...
»

Содержание KALEIDO-MX
























































Отзывы:

Нет отзывов

Похожие инструкции для KALEIDO-MX

DSC-350 - Digital Camera - 0.35 Megapixel

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 67

Бренд: D-Link Страницы: 8

DSC-350 - Digital Camera - 0.35 Megapixel

Бренд: D-Link Страницы: 2

Бренд: Spectare Страницы: 24

Pissarro DPF 70

Бренд: Rollei Страницы: 9

Бренд: Digital Spectrum Страницы: 11

myFirst Camera 3

Бренд: Oaxis Страницы: 4

Santec SFC-241KDIM

Бренд: Burg Wächter Страницы: 8

Бренд: PCO.IMAGING Страницы: 44

Бренд: Insignia Страницы: 4

Бренд: Moultrie Mobile Страницы: 12

Бренд: Ubiquiti Страницы: 28

Бренд: iDule Страницы: 33

Бренд: Delta Страницы: 4

BCS-DMQE2200IR3-G

Бренд: Delta Страницы: 4

Бренд: Uniq Страницы: 14

Бренд: Konyks Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды