GRASS VALLEY K2 FCP CONNECT -, Руководство по установке

Страница: 40 / 52

• K2 Media Servers with role of fi le system server. If a redundant SAN, you must
do this task on both primary and backup K2 Media Server.
1. On a K2 Media Server, using Notepad, open the media fi le system (SNFS)
con fi guration fi le:
The con fi guration fi le can be either
D:\SNFS\config\default.cfg.
or
D:\SNFS\config\gvfs_hostname.cfg
, where
hostname
is the name of the
primary fi le system server (FSM).
2. Locate the WindowsSecurity setting and proceed as follows:
• If WindowsSecurity is set to Yes, skip the remainder of this procedure. Do not
modify or save the SNFS con
fi guration fi le.
• If WindowsSecurity is set to No, continue with this procedure.
3. On a K2 Media Server, verify, and if necessary modify, settings for required values
as follows:
# *********************************************************
# A global section for defining file system-wide parameters
# *********************************************************
.
WindowsSecurity No
GlobalSuperUser Yes
UnixDirectoryCreationModeOnWindows 0777
UnixFileCreationModeOnWindows 0666
.
4. Close, and if necessary save, the SNFS con fi guration fi le.
If you made changes, the K2 system must be restarted for the changes to take effect.
If you made changes to
UnixDirectoryCreationModeOnWindows
and
UnixFileCreationModeOnWindows
parameters, to apply changes to existing assets
you must delete and then re-create fi les and/or bins, such as HotBins.
Configure HotBin
If a K2 SAN, the SNFS con fi guration fi le must have settings as follows:
• If Windows Security is No, GlobalSuperUser must be set to Yes.
• If Windows Security is Yes, no GlobalSuperUser setting is required.
Con fi gure a HotBin on the K2 system to receive the fi nished media from Final Cut
Pro.
1. In K2 AppCenter, create a bin with an appropriate name, such as "dstBin".
2. Con fi gure
dstBin
as a HotBin.
40 K2 FCP Connect Installation Manual 22 October 2010
Installing and con fi guring K2 FCP Connect