8. Identify software installed on the client device and proceed as follows:
•
If any software with Yes in the Required column reports as Not Installed, you
must install it on the client device. After installing the software, click Check
Software.
•
If all software with Yes in the Required column reports as Installed, click Check
Software.
When all required software reports as Installed, continue with the next step in
this procedure.
9. Click
Next
.
The SabreTooth Server Con
fi
guration page opens.
10. Enter the K2 Media Server (FSM) as follows:
•
If a basic (non-redundant) K2 SAN, enter the media
fi
le system K2 Media
Server as primary.
•
If a redundant K2 SAN, enter primary and backup media
fi
le system K2 Media
Servers.
11. Click
Next
.
The Network Con
fi
guration page opens.
This page con
fi
gures both control and media (iSCSI) network connections. The
top port is the port over which the K2 System Con
fi
guration application is
34
K2 FCP Connect Installation Manual
22 October 2010
Installing and con
fi
guring K2 FCP Connect
Содержание K2 FCP CONNECT -
Страница 44: ......
