3. Save the hosts
fi
le.
4. Similarly con
fi
gure the hosts
fi
le on the other K2 systems.
5. Copy the hosts
fi
le or otherwise make the hosts
fi
le accessible to each Final Cut
Pro Macintosh system.
Enable Access Control Lists on the K2 system
Prerequisites for the K2 system are as follows:
•
Current compatible versions of the Windows operating system and SNFS software.
•
Standard C:, D:, E: and V: disk volumes.
•
SNFS has been con
fi
gured with Grass Valley's Storage Utility.
•
The SNFS con
fi
guration
fi
le is located in the
D:\SNFS\config\
directory.
If desired, you can enable Access Control Lists (ACLs). For SAN access enable ACLs
on the K2 Media Server(s). For stand-alone K2 storage access enable ACLs on the
stand-alone K2 system. If you do this task, you must also con
fi
gure Active Directory
Domain on the Macintosh systems.
1. If a redundant K2 SAN, take FSM K2 Media Servers out of service and manage
redundancy as directed in documented procedures.
2. Navigate to
D:\SNFS\config\
and open the SNFS con
fi
guration
fi
le in a text editor.
The
fi
le is named either
default.cfg
or
gvfs_hostname.cfg
where hostname is
the name of the K2 system
—
if a redundant SAN, the name of the primary FSM.
3. Con
fi
rm/enter/modify text lines as necessary to con
fi
gure as follows:
WindowsSecurity Yes
EnforceACLs Yes
UnixIdFabricationOnWindows Yes
UnixDirectoryCreationModeOnWindows 0700
UnixFileCreationModeOnWindows 0600
UnixNobodyGidOnWindows 60001
UnixNobodyUidOnWindows 60001
Avoid duplicate settings.
NOTE: Once ACLs are enabled on the K2 system (WindowsSecurity set to
Yes), they cannot be disabled.
4. Save the SNFS con
fi
guration
fi
le.
5. Restart the K2 system.
6. If a redundant K2 SAN, repeat these steps on the redundant FSM K2 Media Server.
7. After restart of K2 Media Server(s) is complete, restart all clients of the K2 SAN.
22 October 2010
K2 FCP Connect Installation Manual
31
Installing and con
fi
guring K2 FCP Connect
Содержание K2 FCP CONNECT -
Страница 44: ......
