manualshive.com logo in svg

GRASS VALLEY JUPITER -, Инструкция по эксплуатации

Поделиться
Скачать
GRASS VALLEY JUPITER - Скачать руководство пользователя страница 71

JUPITER L-S and LCD Series Control Panel Instruction Manual

71

Serial Data Cables

 

IP Configuration Procedure

1.

A Control panel only needs an IP address if it is using the LAN for 
NetConfig (Software updates). Determine the present IP address of the 
1st panel. This step will be different for each panel, see the previous 
chapters in this manual for your specific panel’s information.

2.

Disconnect any devices on the Jupiter LAN with the same IP address.

L-S or LCD panels are normally shipped with a default IP address.

At the file server PC

You must have Administrator privileges to change Internet settings on a 
Windows PC.

1.

Use the PC's Network Settings dialog to set the TCP/IP address within 
the same local network as the L-S or LCD Panels. 

Note

This connection will only be 

temporary 

if you are using a Serial connection.

For example, if the L-S or LCD Panels address is presently 
192.168.253.100, then the PC address should be changed to be compat-
ible with the 192.168.253.x network (such as “192.168.253.1”). The PC's 
sub net mask should be set to 255.255.255.0 (class C network). In a 
simple network environment, all other TCP/IP network settings are 
irrelevant at this point.

2.

Reboot the PC to apply the changes.

Note

You can use the MS-DOS command, 

ipconfig

 to verify the settings after 

the PC has been restarted.

3.

Start the Internet browser of choice (For example, MS Internet 
Explorer).

The browser’s Proxy setting must be turned off. To check the Proxy 
setting for Internet Explorer, go to Tools > Internet Options > Connec-
tions > LAN Settings.

4.

Enter the L-S or LCD Panels IP address in the URL window or Start 
NetConfig. This will display the L-S or LCD Panel Description web 
page.

5.

Click the Panel Network hyperlink. The Panel Network Configuration 
page will then appear.

Содержание JUPITER -





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды