manualshive.com logo in svg

GRASS VALLEY JUPITER -, Инструкция по эксплуатации

Поделиться
Скачать
GRASS VALLEY JUPITER - Скачать руководство пользователя страница 38

38

JUPITER L-S and LCD Series Control Panel Instruction Manual

Section 1 — L-S series Introduction

 

Ordering Information

JUP-CP-L32 Series Control Panels

JUP-CP-L32-AC

32 button per Source control panel, with the ability to choose any Source or Destination 
included in the input or output table. Includes one display. Rack or desk mounted 1 RU. 
Includes AC power supply (JUP-ACPS-1RU).

JUP-CP-L32-DC

32 button per Source control panel, with the ability to choose any Source or Destination 
included in the input or output table. Includes one display. Rack or desk mounted 1 RU. 
Includes DC power supply. (JUP-DCPS).

JUP-CP-L64 Series Control Panels

JUP-CP-L64-AC

64 button per Source control panel, configurable. Includes buttons for TAKE, LOCK/PRO-
TECT, LEVELS, AND PRESETS. Includes two displays. Rack or desk mounted 2RU. 
Includes AC power supply. (JUP-ACPS-2RU).

JUP-CP-L64-DC

64 button per Source control panel, configurable. Includes buttons for TAKE, LOCK/PRO-
TECT, LEVELS, AND PRESETS. Includes two displays. Rack or desk mounted 2RU. 
Includes DC power supply. (JUP-DCPS).

JUP-CP-LD4 Series Control Panels

JUP-CP-LD4-AC

XY, Sixteen category, full featured routing switcher control panel. Includes three displays 
and buttons for SOURCES, DESTINATIONS, sequences (salvos), and LEVELS. Categories 
are user definable with re-legendable buttons. Includes AC power supply. (JUP-ACPS-
2RU).

JUP-CP-LD4-DC

XY, Sixteen category, full featured routing switcher control panel. Includes three displays 
and buttons for SOURCES, DESTINATIONS, SALVOS, and LEVELS. Categories are user 
definable with re-legendable buttons. Includes DC power supply. (JUP-DCPS).

JUP-CP-LD16 Series Control Panels

JUP-CP-LD16-AC

XY or multiple Destination control panel. Twenty category, full featured routing switcher 
control panel. Includes 8 displays and buttons for SOURCES, DESTINATIONS, OVER-
RIDES, and LEVELS. Categories are user definable with re-legendable buttons. Rack or 
desk mounted 2 RU. Includes AC power supply. (JUP-ACPS-2RU).

JUP-CP-LD16-DC

XY or multiple Destination control panel. Twenty category, full featured routing switcher 
control panel. Includes 8 displays and buttons for Sources, Destinations, Over-rides, and 
Levels. Categories are user definable with re-legendable buttons. Rack or desk mounted 2 
RU. Includes DC power supply. (JUP-DCPS)

JUP-CP-S25 Series Control Panels

JUP-CP-S25-AC

25 x 1 Single Bus control panel. Pushbutton-per-Source routing switcher control panel 
with twenty-five Source selection and eight level selection pushbuttons. Rack or desk 
mounted 1RU. Includes AC power supply. (JUP-ACPS-1RU)

JUP-CP-S25-DC

25 x 1 Single Bus control panel. Pushbutton-per-Source routing switcher control panel 
with twenty-five Source selection and eight level selection pushbuttons. Rack or desk 
mounted 1RU. Includes DC power supply (JUP-DCPS).

JUP-CP-S50 Series Control Panels

JUP-CP-S50-AC

50 x 1 Single Bus, Pushbutton-per-Source routing switcher control panel with 50 Source 
selection and eight level selection pushbuttons. Rack or desk mounted 1RU. Includes AC 
power supply (JUP-ACPS-1RU).

JUP-CP-S50-DC

50 x 1 Single Bus, Pushbutton-per-Source routing switcher control panel with 50 Source 
selection and eight level selection pushbuttons. Rack or desk mounted 1RU. Includes DC 
power supply (JUP-DCPS).

JUP-CP-S100 Series Control Panels

JUP-CP-S100-AC

100 button per Source control panel. 2U, two displays for Destination, status, presets and 
levels. Joystick Override. Buttons for scrolling through every available Source or Destina-
tion, and level selections. Includes AC power supply (JUP-ACPS-2RU)

JUP-CP-S100-DC

100 button per Source control panel. 2U, two displays for Destination, status, presets and 
levels. Joystick Override. Buttons for scrolling through every available Source or Destina-
tion, and level selections. Includes DC power supply (JUP-DCPS)

Содержание JUPITER -





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды