Chapter 4
36 CameraMan 3-CCD Presenter Camera System Installation and Operations
WIDE AutoTRACK View
Press the
WIDE autoTRACK View
button. The
video frame should show a wide body shot of you. If
you would like to alter your image in this view, you
will need to reset the
Wide View
.
To SET or CHANGE the wide autoTRACK VIEW:
1.
After pressing
WIDE View
, use the
SUBJECT
POSITION
arrows to position yourself in the mid-
dle of the video frame.
2.
Use the manual
ZOOM
buttons to set the
needed Zoom perspective, if needed.
3.
Use the manual
FOCUS
buttons to set the focal
point, if needed.
4.
Use the manual
IMAGE
buttons to set the
needed light/dark contrast, if needed.
5.
Press and hold
WIDE
until you hear two beeps,
indicating the new setting is stored.
To RECALL
the wide autoTRACK VIEW:
Press and release
WIDE View
. The camera recalls
the information stored in the
WIDE
button.
RIGHT AutoTRACK View
Press the
RIGHT autoTRACK View
button. Your
image should now be offset to the right side of the
video frame. This view is used when the presenter
wants to share the video screen with key presenta-
tion areas (a left-handed presenter may use this
view while pointing to a flipchart). If you would like to
alter your image in this view, you will need to reset
the
Right View
.
