GRAPHTEC FCX4000 SERIES, Руководство по установке

Страница: 3 / 16

3
Before starting the Setup
Make the following preparations before starting Setup.
•
For the Parts Names, please see in the User's Manual (PDF).
The manual (PDF) is available at:
http://www.graphteccorp.com/support/index.html
•
To use the Cutting Master 5, previously install the design application (Adobe Illustrator or CorelDraw ) that is used.
For the latest supported version, please visit our website.
•
When there are virus detection program or system resident program, terminate them beforehand.
•
Upon installation, be sure to log in Windows/Macintosh using an account with administrator privileges on your computer.
Setup flow
Installing the Software
Setting up the Plotter main unit
1. Attaching a Tool
The cutter blade can replaced depending on the material or thickness of the
media.
P.04
2. Loading the Media
Set up the media in the Plotter.
P.05
3. About the Initial Setup screen
Select "Display Language" and "Length Unit".
P.06
4. Tool adjustment and test cutting
Adjust the tip length of the cutter blade and force (pressure to cut) depending on the material or
thickness of the media. By cutting to test the set media, it can be adjusted to the optimal condition.
P.06
The latest driver / software version and installation instructions are available at:
http://www.graphteccorp.com/support/index.html
Please download it if necessary.
• Windows driver (Do not connect the computer to the cutting plotter before installing.)
• Graphtec Studio 2 (Windows/Mac)
• Cutting Master 5 (Windows/Mac)