- 43 -
17. How to cut test with Test Cut sheet
Please check the following items before performing the cut test with Test Cut sheet.
Prepare the Test Cut sheets that was included with the F-Mark2.
The iMark Plus software is installed in the operation computer.
The F-Mark2 connected to the operation computer and CE7000-40.
The settings of CE7000-40 has been changed to the F-Mark2.
The angle of camera has been adjusted correctly.
The left side Push Roller of the CE7000-40 is in the correct position.
Calibration of the F-Mark2 finished correctly.
1.Load the Test Cut sheets into the Media Supply Tray, and adjust the width of Side Media Guides
and position of Rear Media Guide fit to the Test Cut sheets.
Test Cut sheet
Side Media Guides
Rear Media Guide
Side Media Guides
Adjusting Knob
Rear Media Guide
Adjusting Knob
