Graphite 58G486, Руководство пользователя

Страница: 20 / 144

20
When installing cutting blade observe correct direction of the teeth. Arrow on the saw body shows
direction of spindle rotation.
REPLACEMENT OF CARBON BRUSHES
Replace immediately used up (shorter than 5 mm), burnt or cracked motor carbon brushes. Always replace
both brushes at a time.
Ɣ
Unscrew brush covers ( 16 ) ( fig. E ).
Ɣ
Remove used brushes.
Ɣ
Remove any carbon dust with compressed air.
Ɣ
Insert new carbon brushes ( fig. F ) (brushes should easily move into brush-holders).
Ɣ
Install brush covers ( 16 ).
After the brushes are replaced start the power tool with no load and wait until the brushes fit to the
motor commutator. Entrust replacement of carbon brushes only to a qualified person. Only original
parts should be used.
All faults should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Circular Saw
Parameter Value
Supply voltage 230 V AC
Current frequency 50 Hz
Rated power 1200 W
Spindle rotational speed with no load 5000 rpm
Bevel range 0 0 - 45°
Outer diameter of cutting blade 185 mm
Hole diameter of cutting blade 20 mm
Maximum thickness of cut wood Right angle 65 mm
Bevel (45 0 ) 43 mm
Protection class II
Weight 3.8 kg
Year of production 2016
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
A
= 92.1 dB(A) K = 3 dB(A)
Sound power: Lw
A
= 103.1 dB(A) K = 3 dB(A)
Vibration acceleration: a
h
= 2.092 m/s
2
K = 1,5 m/s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized
in proper plants. Obtain information on wastes utilization from your seller or local authorities.
Used up electric and electronic equipment contains substances active in natural environment.
Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna
2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are
protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach
pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing, modifications for
commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden
and may cause civil and legal liability.