Graphic Products DuraLabel 4000, Руководство пользователя

Страница: 10 / 56

4. Press the locking levers inward, and lift up the print carriage.
4. Feed the end of the label supply under the print carriage and through the manual
cutter module, leaving an inch or two of label supply visible outside of
the printer.
5. Align the label guides to the edges of the label supply by sliding both label guides
toward the label supply at the same time.
6. Close the print carriage (
A
) by gently pressing down until it locks into place.
Press locking levers inward
Label supply threaded through printer
Label guides adjusted to label supply
Print carriage in up position Print carriage down in locked position
Print carriage in up position
A A
-8-