Granvue ET-1801T, Руководство пользователя

Страница: 28 / 33

51 50
About Installation of Main Body
1. Rotate the main body by 90 degree by pressing the fold button
behind the stand.
2. Fix screws (2EA) to wall or fixtures.
3. Hang and fix screws to the shape of the stand bottom.
4. Fix the main-body of monitor in a good looking degree
(rotation degree 5 degree ~ +15 degree).
Side Figure (Rotation Angle)
Always rotate with the push
button pressed
When using as wall-mounted type using stand.
FOLD BUTTON
SIDE
1 2 3
About Installation of Main Body
Caution!
● Make slope up to 20 degree after standing up the liquid monitor.
In this case, you need not press the Fold Button.
●
Press and rotate the Fold Button once again in case of entirely
folding the stand backward.
● Do not rotate the stand by applying excessive force with the Fold
Button not pressed.
The connection part between stand and liquid monitor may be
damaged.
When using as general desk type
Rotate the stand as shown in the below figure with pressing the Fold
Button, and stand liquid monitor.
ROTATION DIRECTION
FOLD BUTTON
FOLD BUTTON
SIDE
SIDE FIGURE
(ROTATION ANGLE)
1 2 3
Granvue ET-1801T 1.21 2002.1.22 12:43 PM Page 50