Grant's Automation MAW6, Схема подключения и инструкции по программированию

Страница: 5 / 6

To Remove all User
Codes or Tags/Cards
press “ 20,000 # ”
press “ # ” then “ ” to exit
programming mode
*
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
www.grantsautomation.com.au - grant@grantsautomation.com.au
LED will go GREEN for 1/2
sec if OK or ‘beep beep
beep’ if not OK
PROGRAMMING:
To Remove a Tag/Card
with Tag/Card
Do
you want to
remove more?
No
Yes
press “ 2 ”
RED LED goes YELLOW
LED will go GREEN for 1/2
sec if OK or ‘beep beep
beep’ if not OK
press “ # ” then “ ” to exit
programming mode
*
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
Swipe Tag/Card
Set Tag/Card only Option
press “ 30 # ”
press “ # ” then “ ” to exit
programming mode
*
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
LED will go GREEN for 1/2
sec if OK or ‘beep beep
beep’ if not OK
Set Tag/Card & Code
Option
press “ 31 # ”
press “ # ” then “ ” to exit
programming mode
*
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
LED will go GREEN for 1/2
sec if OK or ‘beep beep
beep’ if not OK
Set Tag/Card OR Code
Option (default)
press “ 32 # ”
press “ # ” then “ ” to exit
programming mode
*
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
LED will go GREEN for 1/2
sec if OK or ‘beep beep
beep’ if not OK
To Change Activation
Time
Enter time in seconds from
0 to 99
Enter “ <Master Code># ”
Factory code “ 999-999 ”
*
RED flashing LED goes green
for 1/2 sec. then RED no flash
press “ 4 ”
RED LED goes YELLOW
YELLOW LED goes
GREEN for 1/2 sec if OK or
beep beep beep if not OK
press “ # ” then “ ” to exit
programming mode
*