Grant UFLEX EDGE, Руководство пользователя

Страница: 8 / 48

7
This device can either be used as a thermostat or a time clock. Thermostat mode
is the default setting.
To change between thermostat & time clock modes, follow these steps.
• Use the ‘Left/Right’ arrow keys to highlight then press and hold the
button for 3 seconds ..................................................................................................
At this point the screen will go blank showing only ‘SETUP’ and ‘CLOCK’.
• Tap either of the ‘Up’ or ‘Down’ arrow keys to highlight ‘SETUP’, then
hold
the key for 10 seconds ................................................................................................
The device will factory reset then provide 2 selectable mode options.
• Use the Left / Right keys to scroll between modes ...............................................
Mode 1 = Thermostat
Mode 2 = Time Clock
Note: the selected option will flash.
• Press the key to confirm selection ........................................................................
This device will reset all parameters and restart in the selected mode.
Note: The Mode Select function will reset all parameters
(Wireless Air Sensors
and Window/Door Contacts excluded) that were entered during the set-up
operations. These processes must be repeated after the restart has completed.
Mode Select
UFLEX Series