Grant UFLEX EDGE, Руководство пользователя

Страница: 32 / 48

31
Re-calibrating the UFLEX EDGE
This thermostat is factory set and need not re-calibrating under normal operation!
To calibrate, follow the step below.
• Use the ‘Left/Right’ keys to scroll to the Power Icon ...................................
• Press and hold to turn the display ‘OFF’ .............................................................
• Press and hold the and ‘Down’ keys together for 10 seconds ....................
The current temperature will appear on the display.
• Use the ‘Up/Down’ keys to configure the new temperature value ...............
• Press the key to confirm the change and the display will go blank .........
• Press the key once to turn the thermostat ‘ON’ ............................................ ...
Error Codes
E0 = The internal sensor has developed a fault.
E1 = The remote FLOOR probe has not been connected.
The remote FLOOR probe has not been wired correctly.
The remote FLOOR probe is faulty.
E2 = The WIRELESS AIR SENSOR has not been paired correctly.
The WIRELESS AIR SENSOR has lost connection to the edge.
(check batteries).
The remote WIRELESS AIR SENSOR is faulty.
The UFLEX EDGE will display an error code if there is a fault with the temperature
sensor, these error codes are explained below.
UFLEX Series