1
Safety
The following symbols marked on the equipment mean:-
Caution: Read these operating instructions fully before use and pay particular
attention to sections containing this symbol
Caution: Surfaces can become hot during use.
Always observe the following safety precautions
•
Use only as specified by the operating instructions, or the intrinsic protection may be
impaired.
•
After transport or storage in humid conditions, dry out the unit before connecting it to the
supply voltage. During drying out the intrinsic protection may be impaired.
•
Connect only to a power supply with a voltage corresponding to that on the serial number
label.
•
Connect only to a power supply which provides a safety earth (ground) terminal.
•
Before moving, disconnect at the power supply socket. Do not remove the IEC connector.
•
When lifting use top flange by the ventilation grilles at the front and rear or lift from under the
base.
•
Ensure that the mains switch is easily accessible during use.
•
Do not block or restrict ventilation slots.
•
If liquid is spilt inside the unit, disconnect it from the power supply and have it checked by a
competent person.
•
It is the user’s responsibility to carry out appropriate decontamination if hazardous material is
spilt on or inside the equipment.
When using with Baths
•
Do not check the temperature by touch, use the temperature display or a thermometer.
•
To reduce the risk of eye injury during high temperature operation, use safety goggles or
spectacles.
•
Do not touch surfaces which become hot during high temperature operation.
Содержание C1G
Страница 1: ...Refrigerated immersion Coolers C1G C1GL C2G C2GL Operating Manual ...
Страница 2: ......
Страница 10: ...Notes ...
Страница 11: ......