Grant 140/160, Инструкция для пользователя, по установке и обслуживанию

Страница: 3 / 52

3 Multi Pass Oil Boilers
1 - USER INSTRUCTIONS
The boiler will provide domestic hot water and central
heating and is fully automatic once switched on. Kitchen
models have a 'boiler on' neon, see Fig. A, which lights
when the boiler is switched on, but does not necessarily
indicate the burner is firing.
If your Kitchen model has a programmer fitted, it will
provide hot water and central heating during the
periods set on the programmer.
To access the Kitchen model controls, open the front
door from the right (may be altered to open from the
left if required).
Controls for Multi Pass Kitchen models - Fig. A
°C
90
75
60
Boiler
thermostat
Overheat thermostat
reset button
(under plastic cap)
Controls for Boiler House models - Fig. B
1 Ensure that - There is sufficient fuel, of the
correct type, in the supply tank and all fuel supply
valves are open. The water supply is on. The
electricity supply to the boiler is off. The boiler
On/Off switch is set to OFF (Kitchen models). The
room thermostat (if fitted) is at the desired setting.
The boiler thermostat is set to the required setting
(see Section 1.7).
2 Switch on the electricity supply to the boiler.
Note: Boiler House models will light at this stage.
3 For Kitchen models, set the On/Off switch to ON
and, if fitted, the programmer (CH or HW) to ON.
The boiler will now light automatically.
4 If you have a programmer fitted in the control panel
(Kitchen models only), refer to the Programmer
Section and set the programmer. Set the HW and CH
functions to TIMED. The boiler will now operate
during the 'on' periods set on the programmer.
About your boiler 1.1
Boiler controls (see Fig. A or B) 1.2
Lighting your boiler (see Fig. A or B) 1.3