3
Up groove
Down groove
Figure 8
Figure 9
Figure 10
Figure 11
Figure 6
Figure 7
Figure 12
Locking screw
Locking piece
3.Loosen the locking screw to lower the locking piece down all the way (figure 6-7)
4.When mounting the screen onto the floating mounting brackets, ensure the grooves on the screen
casing match up with the upper and lower groves on the brackets. Simply slide in, and bracket's grooves
will hold the casing in place. Horizontal adjustments can still be made (figure 8-10).
5.To lock the screen in place, close and tighten the locking screw on the mounting brackets. This will keep
the screen casing locked firmly in place (figure 11-12).
8
Other Options Connection Diagram
一
. Function Destription for convertion from FM to IR Control
When you insert the Wireless Synchro Convertor Receiver into EXTIR plug of the screen(Figure 45), you can
use FM wireless remote control device. The Intelligent Synchro Power Supply Control Adapter(for all projectors),
with 12V wireless trigger (for projectors with trigger output), can synchronously control the screen. (Figure 46-47)
Wireless Synchro
Convertor Receiver
Figure 45
Intelligent Synchro Power
Supply Control Adapter
二
. External Wall Switch
Manual control for screen up/stop/down.
Figure 48
Intelligent control for screen up/stop/down when
connected to the intelligent interface of the screen.
Intelligent control for screen up/stop/down when
connected to the computer's RS232 or USB
interface
。
Figure 49
Figure 46
Figure 47
三
．
External Intelligent Wall Switch Connection
