2
Installation
Figure 1
Wood wall installation
Wood ceiling installation
Concrete wall installation
Concrete ceiling installation
Figure 2
Figure 3
Figure 4
Figure 5
Wall and Ceiling Mount Installation
Installation Steps:
1.Wood wall and ceiling installation: Drill in the 5 x 40 screws through the appropriate holes in the bracket
(figure 2-3)
2.Drywall and ceiling installation: Install the anchors and drill in the 5 x 40 screws into the appropriate
bracket holes (figure 4-5)
Take out all the parts from the package and following the accessories guideline ensure all the parts are there.
There are three different types of installation available for this product: wall mount, ceiling mount or ceiling hang.
Depending on the installation environment, the floating mounting brackets can be installed at various points for your
convenience. However, the ideal position for the mounting brackets is closer to the endcap as this will reduce
vibration and noise.
1.According to the surface of installation, choose the appropriate screws needed for mounting (regular screws for
wood surfaces, tapping screws for concrete surfaces)
2.Mount the brackets onto the surface, ensuring it is level (tip: draw a erasable level line when mounting the
brackets). See below for picture description (figure 1):
9
How to adjust tension situation of the string
If the string is loose which is caused by bump on transportation or faulty operation (Figure 30), please rotate the
String Adjustment Knob clockwisely to make string tensional (Figure 31). If the string is over-tensional, please press
the String Releasing Button and then rotate the String Adjustment Knob counter-clockwisely to suitable tensional
situation (Figure 32).
String Adjustment Knob
String Releasing
Button
Figure 30
Figure 31
Figure 32
Attention:
> Please make sure there is no dust or dirt on the fabric surface before rolling it back to the casing
> The recommened working time is less than 50 seconds. The motor will enter overheating protection
status and stop working for every continuous 4 minuters operation, user would need to wait for a while
until the motor cool down before operating again.
> There is no lube needed for the motor. Please be noticed that the appropriate setting is optimized
which requires no further adjustment, please consult the after sales team before adjusting the limits.
