Grandstream Networks, Inc.
HT–496 User Manual
Page 9 of 33
Firmware 1.0.3.64
Last Updated: 1/2007
Basic Operations
G
ET
F
AMILIAR WITH
V
OICE
P
ROMPT
HT–496 stores a voice prompt menu (Interactive Voice Response or
IVR
) for quick browsing and simple
configuration. The IVR menu and the LED button work with the FXS port
1
only.
Pick up the handset and press the button on the HT–496 or dial “
***
” to use the IVR menu,
T
ABLE
4: HT–496 IVR Menu Definitions
Menu
Voice Prompt
Options
Main Menu
“Enter a Menu Option”
Press “
*
” for the next menu option
Press “
#
” to return to the main menu
Enter 01-06, 47, 86, 99 menu options
01
“DHCP Mode”,
“Static IP Mode”
Press “
9
” to toggle the selection
If using “
Static IP Mode
”, configure the IP address
information using menus 02 to 05.
If using “
Dynamic IP Mode
”, all IP address information
comes from the DHCP server automatically after reboot.
02
“IP Address “ + IP address
The current WAN IP address is announced
If using “
Static IP Mode
”, enter 12-digit new IP address.
03
“Subnet “ + IP address
Same as menu 02
04
“Gateway “ + IP address
Same as menu 02
05
“DNS Server “ + IP address
Same as menu 02
07
Preferred Vocoder
Press “
9
” to move to the next selection in the list:
•
PCM U / PCM A
•
G.723
•
G.729
•
G.726
•
iLBC
12
WAN Port Web Access
Press “
9
” to toggle between
enable
/
disable
13
Firmware Server IP
Address
Shows current Firmware Server IP address. Enter 12-
digit new IP address.
14
Configuration Server IP
Address
Announces current Config Server Path IP address. Enter
12-digit new IP address.
15
Upgrade Protocol
Upgrade protocol for firmware and configuration update.
Press “
9
” to toggle between
TFTP
/
HTTP
16
Firmware Version
Firmware version information.
17
Firmware Upgrade
Firmware upgrade mode. Press “
9
” to toggle among the
following three options:
- always check
- check when pre/suffix changes
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030