Grandstream Networks, Inc.
HT–496 User Manual
Page 23 of 33
Firmware 1.0.3.64
Last Updated: 1/2007
T
ABLE
10: HT–496 Individual Account Settings Definitions
SIP Server
This field contains the URI string or the IP address (and port, if different from
5060) of the SIP proxy server. e.g., the following are some valid examples:
sip.my-voip-provider.com, or sip:my-company-sip-server.com, or
192.168.1.200:5066
Outbound Proxy
This field contains the URI string or the IP address (and port, if different from
5060) of the outbound proxy. If there is no outbound proxy, this field SHOULD
be blank. If not blank, all outgoing requests are sent to this outbound proxy.
SIP User ID
This field contains the user part of the SIP address for this phone. e.g., if the
SIP address is
sip:my_user_id@my_provider.com
, then the SIP User ID is:
my_user_id.
Do NOT include the preceding “sip:” scheme or the host portion of the SIP
address in this field.
Authenticate ID
SIP service subscriber’s Authenticate ID. Auth ID can be identical to the SIP
User ID.
Authenticate Password
SIP service subscriber’s account password.
Name
SIP service subscriber’s name for Caller ID display.
Use DNS SRV
Default is No. If set to Yes the client will use DNS SRV for server lookup.
User ID is Phone
Number
If the HT–496 has an assigned PSTN telephone number, this field should be
set to “Yes”. Otherwise, set it to “No”.
If “Yes” is set, a “user=phone” parameter will be attached to the “From” header
in SIP request.
SIP Registration
Controls whether the HT–496 needs to send REGISTER messages to the
proxy server. The default setting is Yes.
Unregister on Reboot
Default is No. f set to Yes, the SIP user’s registration information will be
cleared on reboot.
Register Expiration
This parameter allows the user to specify the time frequency (in minutes) the
HT–496 refreshes its registration with the specified registrar. The default
interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes
(about 45 days).
Local SIP port
Defines the local SIP port the HT–496 will listen and transmit. The default
value for FXS port 1 is 5060. The default value for FXS port 2 is 5062.
Local RTP port
Defines the local RTP-RTCP port pair the HT–496 will listen and transmit. It is
the base RTP port for channel 0. When configured,
channel 0
uses this port _value for RTP and the por1 for its RTCP;
channel 1
uses por2 for RTP and por3 for its RTCP.
The default value for FXS port 1 is 5004. The default value for FXS port 2 is
5008.
Use Random Port
This parameter forces the random generation of both the local SIP and RTP
ports when set to Yes. This is usually necessary when multiple HT–496 are
behind the same NAT.
DTMF Payload Type
This parameter sets the payload type for DTMF using RFC2833.
Send DTMF
This parameter specifies the mechanism to transmit DTMF digit. There are
3
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
