T
ABLE
2:
D
EFINITIONS OF THE
HT-502
LED
S
Power LED
Indicates Power. Remains ON when Power is connected and turned ON.
WAN LED
Indicates LAN (or WAN) port activity.
LAN LED
Indicates PC (or LAN) port activity.
PHONE1 /
PHONE2 LED
Indicate status of the respective FXS Ports-PHONE1 / PHONE2 on the back
panel
Busy
- ON (Solid Green)
Available
- OFF
NOTE:
All LEDs display green when ON.
C
ONFIGURE
Y
OUR
ATA
The HT–502 is easy to configure using the embedded GUI pages and the following five (5) steps.
F
IVE EASY STEPS TO
C
ONFIGURE THE
HT–502
1. Connect a standard touch-tone analog telephone (or fax machine) to first FXS port.
2. Connect another standard touch-tone analog telephone (or fax machine) to second FXS port.
3. Insert the Ethernet cable into the WAN port of HT–502 and connect the other end of the Ethernet
cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of HT–502.
5. Insert the power adapter into the HT–502 and connect it to a wall outlet.
F
IGURE
2:
C
ONFIGURING THE
HT–502
Internet ADSL/Cable
Modem Ethernet
WAN
LAN
FXS
F
Cordless Phone
Analog Phone
FXS
F
Cordless Phone
Analog Phone
Grandstream Networks, Inc.
HT-502 User Manual
Page 6 of 31
Firmware 1.0.0.29
Last Updated: 01/2007
