C
ONFIGURE YOUR
HT–502
Configuring your HT–502 and connecting the unit to the VoIP network is very simple. The HT–502 is easy
to configure using the embedded GUI pages and the following five (5) steps outlined below. Before you
begin, please verify the contents of the HT–502 package. Download examples of the GUI Interfaces from
:
http://www.grandstream.com/user_manuals/GUI/GUI_HT502.rar.
E
QUIPMENT
P
ACKAGING
Unpack and check all accessories. Equipment included in the package:
•
one 12V universal power adapter
•
one Ethernet cable
•
one device unit
C
ONNECT
Y
OUR
ATA
First, familiarize yourself with the features of the HT–502. The HT–502 has two FXS ports. Each FXS
port can have a separate SIP account. This is a key feature of HT–502. Both ports can make calls
concurrently.
F
IGURE
1:
C
ONNECTING THE
HT–502
LED Buttons
(green/red)
HT-502
Front View
RJ-45 Ports
10/100 Mbps
RJ-11 FXS Ports
(Phone)
Reset
+5V/1200mA
HT-502
Back View
T
ABLE
1:
D
EFINITIONS OF THE
HT–502
C
ONNECTORS
Power Cable
Connect your PC to the LAN to find IP address from your Router/DHCP Server.
WAN Port (RJ-45)
Connect to the internal LAN network or router.
LAN Port (RJ-45)
Connect the LAN port with an Ethernet cable to your modem Ethernet port.
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
PHONE1 (RJ-11)
FXS port to be connected to analog phones.
PHONE2 (RJ-11)
FXS port to be connected to analog phones.
There are five (5) LED buttons that help you manage the status of your HandyTone.
Grandstream Networks, Inc.
HT-502 User Manual
Page 5 of 31
Firmware 1.0.0.29
Last Updated: 01/2007
