Grandstream Networks GXP2130 Series Скачать руководство пользователя страница 43

Страница: 43 / 89

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE

Page 41 of 87

Use # as Dial Key

Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#"

key will immediately dial out the input digits. In this case, this key is essentially

equivalent to the "Send" key. If set to "No", the "#" key is included as part of the

dialing string and please make sure the dial plan is properly configured to allow
dialing # out. The default setting is “Yes”.

On Hold Reminder Tone

If set to

“Enabled”, phone will play a reminder tone when it has a call on hold.

The default setting is “Disabled”.

Account x



Feature Codes

Enable Local Call

Features

When enabled, Do No Disturb, Call Forwarding and other call features can be

used via the local feature codes on the phone. Otherwise, the provisioned

feature codes from the server will be used. User configured feature codes will

be used only if server provisioned feature codes are not provided. And once

feature codes are configured, either via server provisioning or local setting, a

softkey named

“Features” will show on the LCD screen.

Do Not Disturb

(DND)--On

Configures DND feature code to turn on DND.

Do Not Disturb

(DND)--Off

Configures DND feature code to turn off DND.

Call Forward

Unconditionally (All)--On

Configures Call Forward All feature code to activate unconditional call

forwarding.

Call Forward

Unconditionally (All)--Off

Configures Call Forward All feature code to deactivate unconditional call

forwarding

Call Forward Busy--On

Configures Call Forward Busy feature code to activate busy call forwarding.

Call Forward Busy--Off

Configures Call Forward Busy feature code to deactivate busy call forwarding.

Call Forward Delayed

(No Answer)--On

Configures Call Forward Delayed feature code to activate no answer call

forwarding.

Call Forward Delayed

(No Answer)--Off

Configures Call Forward Delayed feature code to activate no answer call

forwarding.

Delayed Call Forward

Wait Time

Defines the timeout (in seconds) before the call is forwarded on no answer.

The default value is 20 seconds. The valid range is 1 to 120.

Содержание GXP2130 Series


























































































Результаты поиска

Содержание GXP2130 Series

Отзывы:

Бренды по названию

Популярные бренды

Grandstream Networks GXP2130 Series, Руководство администратора

Результаты поиска

Содержание GXP2130 Series

Отзывы:

Бренды по названию

Популярные бренды