Grandstream Networks GXP2130 Series Скачать руководство пользователя

Страница: 35 / 89

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE

Page 33 of 87

maximum value is 64800 minutes (about 45 days).

Reregister Before

Expiration

Specifies the time frequency (in seconds) that the phone sends

re-registration request before the Register Expiration. The default value is 0.

Local SIP Port

Defines the local SIP port used to listen and transmit. The default value is

5060 for Account 1, 5062 for Account 2, 5064 for Account 3, 5066 for Account

4, 5068 for Account 5, 5070 for Account 6. The valid range is from 1 to 65535.

SIP Registration Failure

Retry Wait Time

Specifies the interval to retry registration if the process is failed. The valid

range is 1 to 3600. The default value is 20 seconds.

SIP T1 Timeout

SIP T1 Timeout is an estimate of the round trip time of transactions between a

client and server. If no response is received the timeout is increased, and

request re-transmit retries would continue until a maximum amount of time

define by T2. The default setting is 0.5 seconds.

SIP T2 Timeout

SIP T2 Timeout is the maximum retransmit time of any SIP request messages

(excluding the INVITE message). The re-transmitting and doubling of T1

continues until it reaches the T2 value. The default setting is 4 seconds.

SIP Transport

Determines the network protocol used for the SIP transport. Users can choose

from TCP, UDP and TLS.

The default setting is “UDP”.

SIP URI Scheme when

using TLS

Specifies if "sip" or "sips" will be used when TLS/TCP is selected for SIP

Transport. The default setting is "sips".

Use Actual Ephemeral

Port in Contact with

TCP/TLS

This option is used to control the port information in the Via header and Contact

header. If set to No, these port numbers will use the permanent listening port on

the phone. Otherwise, they will use the ephemeral port for the particular

connection.

The default setting is “No”.

Remove OBP from route

Configures to remove outbound proxy from route. This is used for the SIP

Extension to notify the SIP server that the device is behind a NAT/Firewall.

The default setting is "No".

Support SIP Instance ID

Defines whether SIP Instance ID is supported or not. The default setting is

"Yes".

SUBSCRIBE for MWI

When set to "Yes", a SUBSCRIBE for Message Waiting Indication will be sent

periodically. The phone supports synchronized and non-synchronized MWI.

The default setting is "No".

SUBSCRIBE for

Registration

When set to "Yes", a SUBSCRIBE for Registration will be sent out periodically.

The default setting is "No".

Enable 100rel

The use of the PRACK (Provisional Acknowledgment) method enables

reliability to SIP provisional responses (1xx series). This is very important in

order to support PSTN internetworking. To invoke a reliable provisional

response, the 100rel tag is appended to the value of the required header of the

Содержание GXP2130 Series


























































































Результаты поиска

Содержание GXP2130 Series

Отзывы:

Похожие инструкции для GXP2130 Series

Бренды по названию

Популярные бренды

Grandstream Networks GXP2130 Series, Руководство администратора

Результаты поиска

Содержание GXP2130 Series

Отзывы:

Похожие инструкции для GXP2130 Series

Бренды по названию

Популярные бренды