Grandstream Networks GWN7000 Скачать руководство пользователя

Страница: 94 / 155

P a g e

GWN7000 User Manual

Version 1.0.6.28

Username

Enter the Username for authentication against the VPN Server.

Password

Enter the Password for authentication against the VPN Server.

Connection Type

Select either Transport mode or Tunnel mode:

•

Transport mode

is commonly used between end stations

or between an end station and a gateway, if the gateway is
being treated as a host.

•

Tunnel mode

is used between gateways, or at an end

station to a gateway, the gateway acting as a proxy for the
hosts behind it.

Pre-Shared Key

Enter the L2TP pre-shared key.

Remote Subnet

Configures the remote subnet for the VPN.

The format should be “IP/Mask” where IP could be either IPv4 or

IPv6 and mask is a number between 1 and 32.

For example: 192.168.5.0/24

IP Masquerading

This feature  is  a  form  of  network  address  translation  (NAT)  which
allows  internal  computers  with  no  known  address  outside  their
network, to communicate to the outside. It allows one machine to act
on behalf of other machines.

Masq Source

This option allows the user to configure the local subnets that needs
to be masqueraded.

Use DNS from Server

Enable this option to retrieve DNS from the VPN server.

Keepalive

Specifies the keepalive failure value “n”. if ppp doesn’t receive LCP

response from “n” LCP echo-request frames, then the connection to

the peer will be terminated.

If this option is set LCP echo-request will be sent to the peer for every

5 sec by default.

Connection retries

Configures the number of attempts to reconnect the L2TP client, if

this number is exceeded, the client will be disconnected from the

L2TP/IP Server.

Use Built-in IPv6 management

Enable the IPv6 management for the VPN.

Click

after completing all the fields.

Click

on top of the web GUI to apply changes.

Содержание GWN7000




























































































































































Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды

Grandstream Networks GWN7000, Руководство пользователя

Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды