Figure 71: Traffic Rules – Inbound Rules
The following example rejects incoming ICMP requests to the WAN port, this means that whenever the GWN70xx receives an
incoming ICMP request on the WAN port the destination IP address will receive a message stating that the destination IP
address is unreachable.
Below screenshot shows a configuration example:
Figure 72: Example of Inbound Rule
Outbound Rules
The GWN70xx allows to filter outgoing traffic from the local LAN networks to outside networks and apply rules such as:
•
Accept:
To allow the traffic to go through.
•
Deny:
A reply will be sent to the remote side stating that the packet is rejected.
•
Drop:
The packet will be dropped without any notice to the remote side.
