Table 21:
Port Forward
DMZ
This section can be accessed from
GWN70xx Web GUI → External Access → DMZ
.
GWN70xx supports
DMZ
, where it is possible to specify a Hostname IP Address to be put on the
DMZ
.
Figure 68: DMZ Page
Refer to the below table for DMZ fields:
Table 22: DMZ
UPnP
Protocol Type
Select a protocol, users can select TCP, UDP or TCP/UDP.
WAN port
Select the WAN port
Source IP Address
Sets the IP address that external users access to this device. If not set, any IP address on the
corresponding WAN port can be used
Source Port
Set a single or a range of Ports.
Destination Group
Select VLAN group.
Destination IP Address
Set the destination IP address.
Destination Port
Set a single or a range of Ports.
Enabling the DMZ host function, the computer set as the DMZ host can be completely exposed to the Internet, realizing two-
way unrestricted communication.
DMZ
Click on "
ON
" to enable DMZ
Destination Group
Select the LAN group.
DMZ Hostname IP Address
Set the destination IP address.